N.Y. Comp. Codes R. & Regs. tit. 1 § 143.9

Current through Register Vol. 46, No. 50, December 11, 2024

Section 143.9 - Assembly of Regulated Articles for Inspection

(a) All persons intending to conduct intrastate movement of a regulated article, except as provided in Sections 143.4, 143.5, 143.6, and/or 143. 7 of this Part, shall make an application for inspection as far in advance as possible, in writing to the inspector.

(1) Regulated articles to be inspected shall be prepared and assembled at such locations and in such manner as the inspector shall designate, to allow for the thorough inspection of such article and/or to allow the application of control measures approved by the Department in order to render BTM non-viable.

(2) Before any regulated article that requires inspection under this Section shall be issued a certificate of inspection, such article shall be free from matter or other condition that makes inspection impracticable or infeasible.

(b) The Department shall not be responsible for any cost incident to inspections or certification, other than the cost of providing the designated inspector.

(c) Any determination finding a condition which prevents the issuance of a certificate of inspection under this Section, whether oral or in writing, shall be final unless within seven days from the date of such determination, the applicant notifies the Department in writing of its intention for a proceeding to review such action.

N.Y. Comp. Codes R. & Regs. Tit. 1 § 143.9

Adopted New York State Register May 25, 2022/Volume XLIV, Issue 21, eff. 5/25/2022

Renumbered from 143.8 New York State Register September 20, 2023/Volume XLV, Issue 38, eff. 9/20/2023