N.M. Admin. Code § 20.9.20.14

Current through Register Vol. 35, No. 23, December 10, 2024

Section 20.9.20.14 - ADDITIONAL PERMIT APPLICATION REQUIREMENTS FOR CIVIL ENGINEERING APPLICATION THAT USES 1000 TO 99,999SCRAP TIRES AND IS NO MORE THAN TWO BALES HIGH

Any person seeking a permit for a civil engineering application that uses 1000 to 99,999 scrap tires and is no more than 2 bales high shall submit an application which includes the following information in addition to that required under 20.9.20.13 NMAC. If the civil engineering application applicant has obtained an approval form the army corps of engineers or construction industries division for the siting or design of the civil engineering application, then it may file only the information required in 20.9.20.13 NMAC.

A. A site layout plan of the proposed civil engineering application that is in compliance with the requirements of 20.9.20.37 NMAC, drawn to scale. The plan shall include at least the following information:

(1) labels of all features shown on the map;

(2) map scale;

(3) north arrow;

(4) the proposed civil engineering application;

(5) all structures and buildings at the civil engineering application site if within 100 feet of the civil engineering application;

(6) temporary storage areas for other material, equipment, and residuals from processing;

(7) loading and unloading areas for scap tires and other material to be used for the civil engineering project;

(8) location of all storage areas for scrap tire, tire derived products, used tires and fire lanes;

(9) property boundaries;

(10) water sources, arroyos, wetlands, ditches and other topographic features;

(11) wells;

(12) fences;

(13) easements, and power lines; and

(14) all access routes and internal roads used for residential, commercial and emergency use.

B. If the scrap tires to be used for the proposed civil engineering application will be kept in temporary storage before and during construction on property that is different from the one described in Subsection A of 20.9.20.14 NMAC, the applicant must provide a plat map of the temporary storage facility that includes all items required in Subsection A of 20.9.20.14 NMAC for the civil engineering application.

C. An emergency contingency plan that meets the requirements of 20.9.20.47 NMAC.

N.M. Admin. Code § 20.9.20.14

20.9.20.14 NMAC - N, 8/2/2007