N.M. Admin. Code § 20.6.2.5310
Current through Register Vol. 35, No. 23, December 10, 2024
Section 20.6.2.5310 - REQUIREMENTS FOR WELLS INJECTING HAZARDOUS WASTE REQUIRED TO BE ACCOMPANIED BY A MANIFESTA.Applicability. The regulations in this section apply to all generators of hazardous waste, and to the owners or operators of all hazardous waste management facilities, using any class of well to inject hazardous wastes accompanied by a manifest. (See also Subparagraph (b) of Paragraph (3) of Subsection A of 20.6.2.5004 NMAC.)B.Authorization. The owner or operator of any well that is used to inject hazardous waste required to be accompanied by a manifest or delivery document shall apply for authorization to inject as specified in 20.6.2.5102 NMAC within six months after the approval or promulgation of the state UIC program.C.Requirements. In addition to complying with the applicable requirements of this part, the owner or operator of each facility meeting the requirements of Subsection B of this section, shall comply with the following. (1)notification. The owner or operator shall comply with the notification requirements of 42 U.S.C. Section 6930. (2)identification number. The owner or operator shall comply with the requirements of 20.4.1.500 NMAC (incorporating 40 CFR Section 264.11).(3)Manifest system. The owner or operator shall comply with the applicable recordkeeping and reporting requirements for manifested wastes in 20.4.1.500 NMAC (incorporating 40 CFR Section 264.71).(4)Manifest discrepancies. The owner or operator shall comply with 20.4.1.500 NMAC (incorporating 40 CFR Section 264.72).(5)Operating record. The owner or operator shall comply with 20.4.1.500 NMAC (incorporating 40 CFR Sections 264.73(a), (b)(1), and (b)(2)). (6)Annual report. The owner or operator shall comply with 20.4.1.500 NMAC (incorporating 40 CFR Section 264.75). (7)Unmanifiested waste report. The owner or operator shall comply with 20.4.1.500 NMAC (incorporating 40 CFR Section 264.75).(8)Personnel training. The owner or operator shall comply with the applicable personnel training requirements of 20.4.1.500 NMAC (incorporating 40 CFR Section 264.16).(9)certification of closure. When abandonment is completed, the owner or operator must submit to the director certification by the owner or operator and certification by an independent registered professional engineer that the facility has been closed in accordance with the specifications in 20.6.2.5209 NMAC. N.M. Admin. Code § 20.6.2.5310
Adopted by New Mexico Register, Volume XXVI, Issue 15, August 14, 2015, eff. 8/31/2015