N.M. Admin. Code § 20.6.2.5208

Current through Register Vol. 35, No. 23, December 10, 2024

Section 20.6.2.5208 - REPORTING REQUIREMENTS FOR CLASS I NON-HAZARDOUS WASTE INJECTION WELLS AND CLASS III WELLS

A. Reporting Requirements for Class I non-hazardous waste injection wells.

(1) If a Class I non-hazardous waste injection well is found to be discharging or is suspected of discharging fluids into a zone or zones other than the permitted or authorized injection zone, the discharger shall within 24 hours notify the secretary of the circumstances and action taken. The discharger shall provide subsequent written reports as required by the secretary.

(2) The discharger shall provide reports quarterly to the secretary on:

(a) The physical, chemical and other relevant characteristics of injection fluids;

(b) Monthly average, maximum and minimum values for injection pressure, flow rate and volume, and annular pressure; and

(c) The results of monitoring prescribed under Subsection B of Section 20.6.2.5207 NMAC.

(3) The discharger shall report, no later than the first quarterly report after completion, the results of:

(a) Periodic tests of mechanical integrity as required in Sections 20.6.2.5204 and 20.6.2.5207 NMAC;

(b) Any other test of the Class I non-hazardous waste injection well conducted by the discharger if required by the secretary;

(c) Any well work-over; and

(d) Any changes within the area of review which might impact subsurface conditions.

B. Reporting Requirements for Class III wells.

(1) The discharger shall notify the secretary within 48 hours of the detection or suspected detection of a leachate excursion, and provide subsequent reports as required by the secretary.

(2) The discharger shall provide to the secretary:

(a) Reports on required monitoring quarterly, or more frequently as required by the secretary; and

(b) Results of mechanical integrity testing as required in Sections 20.6.2.5204 and 20.6.2.5207 NMAC and any other periodic tests required by the secretary. These results are to be reported no later than the first regular report after the completion of the test.

(3) Where manifold monitoring is permitted, monitoring results may be reported on a well field basis, rather than individual well basis.

C. Report Signatory Requirements.

(1) All reports submitted pursuant to this Section shall be signed and certified as provided in Subsection G of Section 20.6.2.5101 NMAC, or by a duly authorized representative.

(2) For a person to be a duly authorized representative, authorization must:

(a) Be made in writing by a signatory described in Paragraph (1) of Subsection G of Section 20.6.2.5101 NMAC;

(b) Specify either an individual or a position having responsibility for the overall operation of that regulated facility or activity, such as the position of plant manager, operator of a well or well field, superintendent, or position of equivalent responsibility; and

(c) Have been submitted to the secretary.

N.M. Admin. Code § 20.6.2.5208

9-20-82, 12-1-95; 20.6.2.5208 NMAC - Rn, 20 NMAC 6.2.V.5208, 1-15-01; A, 12-1-01