N.M. Admin. Code § 20.5.106.616

Current through Register Vol. 35, No. 23, December 10, 2024

Section 20.5.106.616 - REQUIRED CERTIFICATIONS

A. Certification of compliance. All owners and operators of new underground storage tank systems shall certify in the registration form required by 20.5.102 NMAC compliance with the following requirements:

(1) installation of tanks and piping in 20.5.106.605 NMAC for UST systems;

(2) cathodic protection of steel tanks and piping in 20.5.106.602 NMAC and 20.5.106.610 NMAC for UST systems, or 20.5.106.604 NMAC for UST systems;

(3) financial responsibility under 20.5.117 NMAC; and

(4) release detection in 20.5.108 NMAC.

B. Installer certification. All owners and operators of new underground storage tank systems shall ensure that the installer certifies in the registration form required by 20.5.102 NMAC that the methods used to install the storage tanks and piping comply with the requirements in 20.5.106 NMAC.

C. Certification of installation. Owners and operators shall demonstrate compliance with the installation standards in 20.5.106 NMAC. Owners and operators shall provide a certification of installation on the UST registration form required by 20.5.102 NMAC, which asserts that all of the following methods of certification, testing, and inspection were used to demonstrate compliance with installation requirements of the UST system:

(1) the installer has been certified by the tank and piping manufacturers;

(2) the installer has been certified or licensed as required in 20.5.105 NMAC; and

(3) the installer has notified, submitted required documentation to, and the installation has been inspected by the department; and

(4) all work listed in the manufacturer's installation checklists has been completed.

N.M. Admin. Code § 20.5.106.616

Adopted by New Mexico Register, Volume XXIX, Issue 14, July 24, 2018, eff. 7/24/2018