N.M. Admin. Code § 20.5.105.516
Current through Register Vol. 35, No. 23, December 10, 2024
Section 20.5.105.516 - CERTIFIED JUNIOR INSTALLER DUTIES AND OBLIGATIONSA. No individual shall agree to perform an installation, replacement, repair or modification of spill and overfill prevention equipment unless the individual is a certified junior installer and is competent to perform the installation, replacement, repair or modification.B. Junior installers shall acquire and maintain certification from the manufacturers of the spill and overfill prevention equipment they modify, install, replace, or repair, as applicable.C. A junior installer of AST systems who is certified to repair or replace entirely above ground piping shall maintain all certifications and licenses as required by 20.5.105 NMAC.D. A junior installer shall exercise responsible supervisory control when helpers are used.E. A junior installer has a duty to report to the department any and all suspected or confirmed releases, as those terms are used in 20.5.118 NMAC, detected at a site or the surrounding area by the junior installer or persons working under the junior installer's supervisory control, as required by 20.5.118 NMAC.F. A junior installer shall not perform any installation, replacement, repair, modification or removal of spill and overfill prevention equipment without providing notice as required by the provisions of 20.5 NMAC.G. A junior installer shall comply with all of the provisions of the petroleum storage tank regulations, 20.5 NMAC.N.M. Admin. Code § 20.5.105.516
Adopted by New Mexico Register, Volume XXIX, Issue 14, July 24, 2018, eff. 7/24/2018