N.M. Admin. Code § 20.2.62.201

Current through Register Vol. 35, No. 21, November 5, 2024

Section 20.2.62.201 - EMISSION LIMITS

A. Emission Limits: The owner or operator shall not cause or allow any emission limit in Table 1 (20.2.62.213 NMAC) to be exceeded.

B. Compliance:

(1) Compliance with emission limits for sulfur dioxide and nitrogen dioxide shall be determined by continuous emission monitor measurements as calculated in the form of 24-hour daily averages.

(2) Compliance with the emission limit for carbon monoxide shall be determined by continuous emission monitor measurements as calculated in the form of 4-hour block averages.

(3) Compliance with the emission limits for particulate matter, PCDD/PCDF, total hydrocarbon, hydrogen chloride and metals shall be determined by manual tests conducted in accordance with 20.2.62.204 NMAC. For metals, the percent removal shall be calculated as the percent difference between the measured concentrations at the inlet and outlet of the air pollution control system.

(4) Compliance with the opacity limit in Table 1 (20.2.62.213 NMAC) shall be determined by continuous emission monitor measurements and 40 CFR Part 60, Appendix A, Method 9 as calculated in the form of 6-minute averages.

N.M. Admin. Code § 20.2.62.201

11/30/95; 20.2.62.201 NMAC - Rn, 20 NMAC 2.62.300 - 301 10/31/02