N.M. Admin. Code § 20.2.50.111

Current through Register Vol. 35, No. 20, October 22, 2024

Section 20.2.50.111 - APPLICABILITY

A. This Part applies to certain crude oil and natural gas production and processing equipment associated with operations that extract, collect, separate, dehydrate, store, process, transport, transmit, or handle hydrocarbon liquids or produced water in the areas specified in 20.2.50.2 NMAC and are located at well sites, tank batteries, gathering and boosting stations, natural gas processing plants, and transmission compressor stations, up to the point of the local distribution company custody transfer station.

B. In determining if any source is subject to this Part, including a small business facility as defined in this Part, the owner or operator shall calculate the Potential to Emit (PTE) of such source and shall have the PTE calculation certified by a qualified professional engineer or an inhouse engineer with expertise in the operation of oil and gas equipment, vapor control systems, and pressurized liquid samples. The emission standards and requirements of this Part may not be considered in the PTE calculation required in this Section or in determining if any source is subject to this Part. The calculation shall be kept on file for a minimum of five years and shall be provided to the department upon request. This certified calculation shall be completed before startup for new sources, and within two years of the effective date of this Part for existing sources.

C. An owner or operator of a small business facility as defined in this Part shall comply with the requirements of this Part as specified in 20.2.50.125 NMAC.

D. Oil transmission pipelines, oil refineries, natural gas transmission pipelines (except transmission compressor stations), and saltwater disposal facilities are not subject to this Part.

N.M. Admin. Code § 20.2.50.111

Adopted by New Mexico Register, Volume XXXIII, Issue 14, July 26, 2022, eff. 8/5/2022