N.M. Admin. Code § 19.27.5.11

Current through Register Vol. 35, No. 23, December 10, 2024

Section 19.27.5.11 - OTHER 72-12-1.1 DOMESTIC WELL PERMIT APPLICATIONS

Other 72-12-1.1 domestic well permit applications may be made only as specifically provided for in this section. Permit applications made in accordance with this section require an existing 72-12-1.1 domestic well permit in good standing. Applications shall be prepared on a form prescribed by the state engineer and the applicant shall be the owner of record of the 72-12-1.1 domestic well permit. The description of the well location shall be made in accordance with Subsection B of 19.27.5.9 NMAC. The publication of a legal notice is not required for a permit application made in accordance with Subsection A, B, C, or D of this section. A permit issued pursuant to Subsections A, B, or C of this section for an existing 72-12-1.1 domestic well permit in good standing will not affect the maximum authorized diversion amount from the 72-12-1.1 domestic well. No change may be made to the point of diversion, place of use, or purpose of use authorized under a 72-12-1.1 domestic well permit except as provided for in Subsection E of this section.

A. Application for permit to replace a 72-12-1.1 domestic well: A permit from the state engineer is required to drill a replacement 72-12-1.1 domestic well. The state engineer shall require the well being replaced to be plugged or capped in accordance with the regulations of the office of the state engineer. The replacement well shall be permitted by the state engineer to serve the same authorized legal lot(s) of record and to serve the same type of domestic use as the 72-12-1.1 domestic well being replaced. An application shall include the file number of the well to be replaced, the name and mailing address of the applicant, the type of domestic use, the location of the existing well, the proposed location of the replacement well, the name of the owner of the land on which the replacement well is to be drilled, the name and license number of the well driller (if known), the proposed depth of the replacement well, the outside diameter of the replacement well casing, the reason for replacing the well, and other information the state engineer deems necessary. The state engineer may require a meter on a replacement 72-12-1.1 domestic well as a condition of the new permit.

B. Application for permit for supplemental 72-12-1.1 domestic well: A permit from the state engineer is required to drill a supplemental 72-12-1.1 domestic well. The total combined diversion from the 72-12-1.1 domestic well and the supplemental well shall not exceed the maximum diversion amount authorized under the 72-12-1.1 domestic well permit. An application shall include the name and mailing address of the applicant, the type of domestic use, the state engineer file number, the location of the existing well, the authorized maximum diversion amount of the domestic well to be supplemented, the existing capacity of the well to be supplemented, the proposed location of the supplemental well, the name of the owner of the land on which the supplemental well is to be drilled, the name and license number of the well driller (if known), the proposed depth of the supplemental well, the outside diameter of the supplemental well casing, and other information the state engineer deems necessary. The state engineer shall require the installation of a meter on both the supplemental well and the 72-12-1.1 domestic well being supplemented as a condition of the new permit.

C. Application for permit to repair or deepen a 72-12-1.1 domestic well: A permit from the state engineer is required to repair or deepen a 72-12-1.1 domestic well. A permit to repair a 72-12-1.1 domestic well is required for any type of repair work involving the use of a drill rig. A permit is not required for work on pumping equipment. An application shall include the state engineer file number of the 72-12-1.1 domestic well to be deepened or repaired, the name and mailing address of the permit holder, the location of the well, the name and license number of the well driller (if known), a description of the work to be performed, the proposed depth (if the application is for deepening the well), and other information the state engineer deems necessary. The state engineer may require a meter on a 72-12-1.1 domestic well to be repaired or deepened as a condition of the new permit.

D. Application for permit to amend the type of domestic use of a 72-12-1.1 domestic well permit: A permit from the state engineer is required to amend the type of domestic use between single household, multiple household, or drinking and sanitary uses that are incidental to the operations of a governmental, commercial, or non-profit facility. An application shall include the state engineer file number of the 72-12-1.1 domestic well permit, the name and mailing address of the applicant, the current authorized type of domestic use, the proposed type of domestic use, and other information deemed necessary by the state engineer. The state engineer may require a meter on a 72-12-1.1 domestic well as a condition of the new permit when the type of domestic use is changed.

E. Change in point of diversion or alternate point of diversion: The point of diversion of a permitted, declared, or adjudicated 72-12-1.1 domestic well may be changed only:

(1) pursuant to a water rights settlement approved by the state engineer and a court, for those wells drilled prior to a date specified and in a manner specifically authorized by the settlement, where such settlement requires the plugging of each 72-12-1.1 domestic well for which the point of diversion is changed and prohibits the drilling of new 72-12-1.1 domestic wells within the specifically described exclusive service area; or

(2) pursuant to 72-12-7 NMSA by an owner of a 72-12-1.1 domestic well located within the infrastructure capacity area of an association, to change the point of diversion into a well owned and operated by an association in accordance with the following provisions:

(a) the change in point of diversion shall be made upon application to the state engineer and upon a showing that the change will not impair existing rights and will not be contrary to conservation of water within the state and will not be detrimental to the public welfare of the state; the application may be granted only after notice and opportunity for hearing are provided as prescribed by Subsection D of Section 72-12-3 NMSA;

(b) an association that allows the point of diversion of a domestic well to be changed to that of an association's well shall file with the state engineer at the time of application a map depicting the boundaries of the association's infrastructure capacity area and updated maps of any expansion of the boundaries of the association's infrastructure capacity area, if not already on file;

(c) only domestic wells located within the boundaries of the infrastructure capacity area of the association that were permitted prior to the time the association files its infrastructure capacity area boundaries or an update of those boundaries with the state engineer may have their points of diversion changed to the association's point of diversion;

(d) once the association files its infrastructure capacity area map or updated map with the state engineer, the state engineer shall issue permits only for new domestic wells to be located on property from which no domestic well point of diversion has been previously changed; exceptions will be considered only if necessitated by public health, safety and welfare concerns;

(e) an association shall be listed as co-applicant on the application.

N.M. Admin. Code § 19.27.5.11

19.27.5.11 NMAC - N, 8-15-2006; A, 10-31-2011