N.M. Admin. Code § 19.15.7.13

Current through Register Vol. 36, No. 1, January 14, 2025

Section 19.15.7.13 - WELL LOCATION AND ACREAGE DEDICATION PLAT (Form C-102)

A. Form C-102 is a dual purpose form the operator uses to show the well's exact location and the acreage dedicated to the well. The form is also used to show the ownership and status of each lease contained within the dedicated acreage. When there is more than one working interest or royalty owner on a given lease, designation of the majority owner et al. is sufficient.

B. An operator shall fill out and certify the information required on form C-102 except the well location on the plat. A professional surveyor, registered in the state of New Mexico, or surveyor approved by the division, shall plot and certify the well location on the plat from the section's outer boundaries.

C. An operator shall file amended form C-102 in the event there is a change in the information the operator previously submitted. The operator does not need to provide certification of the well location when filing amended form C-102.

N.M. Admin. Code § 19.15.7.13

19.15.13.13 NMAC - Rp, 19.15.13.1102 NMAC, 12/1/08