N.M. Admin. Code § 19.14.53.8
Current through Register Vol. 35, No. 23, December 10, 2024
Section 19.14.53.8 - GEOTHERMAL RESOURCES WELL LOCATION AND ACREAGE DEDICATION PLAT. (FORM G-102)A. Form G-102 is a dual purpose form used to show the exact location of the well and the acreage dedicated thereto. The form is also used to show the ownership and status of each lease contained within the dedicated acreage. When there is more than one working interest or royalty owner on a given lease, designation of the majority owner et al. will be sufficient.B. All information required on form G-102 shall be filled in and certified by the operator of the well except the well location on the plat. This is to be plotted from the outer boundaries of the section and certified by a registered professional engineer and/or land surveyor, registered in the state of New Mexico, or a surveyor approved by the Division. The surveyed location of thermal gradient wells is not required. Instead, an estimated location in a given quarter-quarter section will suffice.C. Form G-102 shall be submitted in quadruplicate or quintuplicate as provided in Rule G-201 [now 19.14.52 NMAC].D. Amended form G-102 (in quadruplicate or quintuplicate) shall be filed in the event there is a change in any of the information previously submitted. The well location need not be certified when filing amended form G-102.N.M. Admin. Code § 19.14.53.8