N.M. Admin. Code § 18.20.11.17

Current through Register Vol. 36, No. 1, January 14, 2025

Section 18.20.11.17 - RESPONSIBILITIES OF INSTALLERS

An installer shall

A. provide expert or other required testimony in any civil or criminal proceedings regarding the installation, servicing, and removal of devices or the interpretation of recorded data.

B. reimburse the Bureau for any costs incurred if the installer requests the Bureau to provide testimony in any civil or criminal procedures involving the installation, servicing, and removal of an ignition interlock device.

C. not reveal any personal and medical information provided by drivers to any person other than the appropriate authorities or employees of the manufacturer or service center operator on an as-needed basis.

D. use only reference samples certified by an independent laboratory and approved by the Bureau to calibrate ignition interlock devices. If an installer uses wet bath reference samples to calibrate ignition interlock devices from a mobile service center, the installer shall:

(1) maintain the reference samples within the temperature limits specified by the manufacturer of the reference sample for accuracy of results; or

(2) pre-calibrate substitute devices at the fixed site service center and exchange them for the devices needing calibration at the mobile service center.

E. comply with all requirements of this rule.

N.M. Admin. Code § 18.20.11.17

18.20.11.17 NMAC - Rp, 18 NMAC 20.11.10, 1-1-03