N.M. Admin. Code § 17.9.568.10
Current through Register Vol. 35, No. 23, December 10, 2024
Section 17.9.568.10 - APPLICABLE CODES AND STANDARDSA. The interconnection customer shall install, operate, and maintain the generating facility and the interconnection equipment in a safe manner in accordance with the rules for safety and reliability set forth in the latest editions of the national electrical code, other applicable local, state, and federal electrical codes, and prudent electrical practices.B. In order to qualify for any interconnection procedures, each generating facility generator shall be in conformance with the following codes and standards (or their successors) as applicable, unless otherwise provided by law: (1) IEEE Std 1547T, IEEE standard for interconnection and interoperability of distributed energy resources with associated electric power systems interfaces, as amended by IEEE 1547aT-2020, including use of IEEE 1547.1T-2020 testing protocols to establish conformity;(2) IEEE Std 1547.1T-.2020T, standard conformance test procedures for equipment interconnecting distributed energy resources with electric power systems and associated interfaces;(3) ANSI C84.1-2020, electric power systems and equipment - voltage ratings (60 Hertz);(4) IEEE Std 1547.2T-2008T, application guide for IEEE 1547 standard for interconnecting distributed resources with electric power systems;(5) IEEE Std 1547.6T-2011T, IEEE recommended practice for interconnecting distributed resources with electric power systems distribution secondary networks;(6) IEEE Std 1547.7T-2013T, IEEE guide for conducting distribution impact studies for distributed resource interconnection;(7) IEEE C62,92.6T-2017 IEEE Guide for Application of Neutral Grounding in Electrical Utility Systems, Part VI - Systems Supplied by Current Regulated Sources;(8) UL 1741, Edition 3, September 28, 2021 Inverters, Converters, Controllers and Interconnection System Equipment for Use with Distributed Energy Resources;(9) NFPA 70, current version, National Electrical Code, including any NM or local modifications;(10) IEEE C2, current version, National Electrical Safety Code, including any NM or local modifications;(11) UL 1741 Certification Requirement Decision for Power Control Systems, March 8, 2019, Inverters, Converters, Controllers and Interconnection System Equipment for Use With Distributed Energy Resources.C. The interconnection equipment shall be considered certified for interconnected operation if the equipment package has been tested and listed by a nationally recognized testing and certification laboratory (NRTL) for continuous interactive operation with a utility grid.N.M. Admin. Code § 17.9.568.10
17.9.568.10 NMAC - N, 10/15/08, Adopted by New Mexico Register, Volume XXXIV, Issue 03, February 14, 2023, eff. 2/14/2023