N.M. Admin. Code § 16.8.2.34

Current through Register Vol. 35, No. 21, November 5, 2024

Section 16.8.2.34 - MINIMUM STANDARDS FOR THE MANUFACTURE OF CANNABIS PRODUCTS

A.General requirements: Licensees shall ensure the following:

(1) manufacturing shall be done in premises that are in compliance with state and local laws that do not conflict with the Cannabis Regulation Act or the Lynn and Erin Compassionate Use Act;

(2) the licensee's right to use the quantity of water sufficient to meet the manufacturing facility's needs remains in good standing;

(3) weighting or measuring devices that are used in the wholesale of cannabis be appropriately documented as having undergone certified registration and calibration that is in accordance with applicable requirements of the New Mexico department of agriculture; and

(4) licensee shall notify the division of any changes to the days or hours of business operation;

B.Permissible Extractions:

(1) Except as provided in Paragraph (2), cannabis extraction shall only be conducted using the following methods:

(a) Mechanical extraction, such as dry screens, sieves, or presses, potable water and ice made from potable water, cryogenic or subzero manufacturing not involving a solvent, or pressure and temperature;

(b) Chemical extraction using a nonvolatile solvent such as a nonhydrocarbon-based or other solvent such as water, vegetable glycerin, vegetable oils, animal fats, or food-grade glycerin, (nonhydrocarbon-based solvents shall be food grade);

(c) Chemical extraction using a division approved closed loop extraction system; or

(d) A method authorized by the division pursuant to Paragraph (2) below.

(2) To request authorization from the division to conduct cannabis extraction using a method other than those specified in Subparagraphs (a) - (c) above, the applicant or licensee shall submit a detailed description of the extraction method, including any documentation that validates the method and any safety procedures to be utilized to mitigate any risk to public or worker health and safety.

(3) Extraction equipment shall be used and operated in accordance with its intended manufacturer use and design.

(4) Current safety data sheets shall be kept on the premises for all chemicals used in the extraction process.

C.Volatile Solvent Extractions: Chemical extractions using volatile solvents shall be subject to the following minimum requirements:

(1) hydrocarbon-based solvents shall be at least 99.5 percent purity with a certificate of analysis from the manufacturer to confirm purity;

(2) ethyl alcohol must be food grade, and non-denatured in composition;

(3) solvents shall be free of odorants, bitterants, or other additives and stored, handled, and disposed of in accordance with local, state, and federal regulations,

(4) all extractions shall be performed in a closed loop extraction system, unless approved by the division, as described in Subsection B of 16.8.2.34 NMAC; and

(5) licensees shall not use ignition sources including but not limited to a heat gun or any open flame source next to extraction equipment that utilizes volatile solvents, including in rooms designated solely for extraction or in areas that contain or uses flammable liquids and gasses.

D.Closed-Loop Extraction System Requirements:

(1) Closed loop systems, other equipment used, the extraction operation, and facilities must be approved for use by the local fire code official and meet any required fire, safety, and building code requirements specified in:

(a) National Fire Protection Association (NFPA) standards;

(b) International Building Code (IBC);

(c) International Fire Code (IFC); or

(d) Other applicable standards including all applicable fire, safety, and building codes related to the processing, handling and storage of the applicable solvent or gas.

(2) All pressure vessels must comply with the Construction Industries Licensing Act, Section 60-13-1et seq., NMSA 1978, including associated rules, applicable codes, and standards.

(3) A list of the name(s) of all trained employees must be prominently displayed inside or immediately outside of the extraction area.

(4) A licensee that is currently approved to use CO2 or a volatile solvent for extraction has 6 months from the effective date of this rule to comply with the applicable requirements. Nothing in this subsection is intended to relieve a licensee of its obligation to comply with any applicable federal, state, or local laws and regulations.

N.M. Admin. Code § 16.8.2.34

Adopted by New Mexico Register, Volume XXXII, Issue 18, September 28, 2021, eff. 9/8/2021, Amended by New Mexico Register, Volume XXXII, Issue 24, December 28, 2021, eff. 12/28/2021