N.M. Admin. Code § 14.9.4.11

Current through Register Vol. 35, No. 21, November 5, 2024

Section 14.9.4.11 - VIOLATIONS AND PENALTIES

Violation(s) of this code and/or the technical codes may result in one or more of the following:

A. The construction industries division may assess the licensee an administrative penalty provided under the provisions of the Construction Industries Licensing Act and the LPG Act, (NMSA 1978), or its rules and regulations.

B. The division may require a double permit fee when any work is started prior to acquiring the necessary permit as stated in the provisions of the Construction Industries Licensing Act and LPG Act, (NMSA 1978) or its rules and regulations.

C. Whenever any work is being done contrary to the provisions of these rules or the technical codes, the director may order the work stopped by notice in writing served on a person engaged in doing or causing such work to be done, and that person shall forthwith stop such work until authorized by the director or the mechanical bureau chief to proceed with the work.

D. Pursuant to Section 6 [now 14.9.4.6 NMAC] (inspections) of the construction industries rules and regulations, failure of a licensee to call for final inspection may result in the commission assessing up to a five hundred dollar ($500.00) penalty for each failure.

E. Pursuant to Section 6 [now 14.9.4.6 NMAC] (inspection[s]) of the construction industries division rules and regulations, failure of a licensee to cure any cited violation within 90 days may result in the commission assessing up to a two hundred fifty dollar ($250.00) penalty for each such code violation.

F. The alteration of any safety device by a licensee may be subject to a penalty assessed by the commission.

N.M. Admin. Code § 14.9.4.11

1-1-98; 14.9.4.11 NMAC - Rn, 14 NMAC 9.4.11, 08-01-03