N.J. Admin. Code § 8:62-4.2

Current through Register Vol. 56, No. 21, November 4, 2024

Section 8:62-4.2 - Types of courses

(a) Initial training courses shall meet the following requirements:

1. The lead abatement worker for housing and public buildings training course shall include a minimum of 32 hours of training of which a minimum of 10 hours shall be dedicated to the conduct of hands-on training. The topics which shall be presented are set forth at 8:62-4.6;

2. The lead abatement supervisor for housing and public buildings training course shall include a minimum of 40 hours of training of which a minimum of eight hours shall be dedicated to the conduct of hands-on training. The topics which shall be presented are set forth at 8:62-4.7;

3. The lead inspector/risk assessor training course shall include a minimum of 40 hours of training of which a minimum of eight hours shall be dedicated to the conduct of hands-on training. The topics which shall be presented are set forth at 8:62-4.8;

4. The lead planner/project designer course shall include a minimum of 56 hours of training of which a minimum of 12 hours shall be dedicated to the conduct of hands-on training. The topics which shall be presented are set forth at 8:62-4.9;

5. The lead abatement worker for commercial buildings and superstructures training course shall include a minimum of 32 hours of training of which a minimum of 10 hours shall be dedicated to the conduct of hands-on training. The topics which shall be presented are set forth at 8:62-4.10; and

6. The lead abatement supervisor for commercial buildings and superstructures training course shall include a minimum of 32 hours of training of which a minimum of eight hours shall be dedicated to the conduct of hands-on training. The topics which shall be presented are set forth at 8:62-4.11.

(b) The hour requirements listed in (a)1 through 6 above shall be exclusive of lunch and break times.

(c) Demonstrations not involving individual participation shall not be considered as hands-on training.

(d) Biennial refresher training, exclusive of lunch and break times, shall meet the minimum requirements in (d)1 through 4 below. The topics required to be presented during refresher training are set forth at 8:62-4.12.

1. Seven hours for the worker courses;

2. Seven hours for the supervisor courses;

3. Seven hours for the inspector/risk assessor course; and

4. Seven hours for the planner/project designer course.

(e) Initial and refresher training for all lead courses shall be specific to a single discipline and shall not be combined with training for other disciplines.

N.J. Admin. Code § 8:62-4.2