Statutes, codes, and regulations
New Jersey Administrative Code
Title 7 - ENVIRONMENTAL PROTECTIONChapter 27 - AIR POLLUTION CONTROL
Subchapter 32 - OUTER CONTINENTAL SHELF AIR REGULATIONS (RECODIFIED)
Section 7:27-32.10 - Labeling of retrofit devices

N.J. Admin. Code § 7:27-32.10

Download
PDF
Current through Register Vol. 56, No. 24, December 18, 2024
Section 7:27-32.10 - Labeling of retrofit devices
(a) Each retrofit device sold or installed pursuant to this subchapter must be labeled with a legible and durable label affixed to a conspicuous location on the engine or engine compartment and on the retrofit device so that it can be easily read and understood during daylight without the assistance of artificial lighting or reflective devices. The label must provide a unique identification number to be matched to the specific retrofit device and the specific vehicle required to use the retrofit device.
(b) At a minimum, any retrofit label affixed pursuant to (a) above must include:
1. The name, address, and phone number of the manufacturer;
2. A unique serial number;
3. The month and year of manufacture. The month and year of manufacture are not required on the label if the manufacturer of the retrofit device provides or encodes this information in the serial number; and
4. The retrofit device family name, as described at (c) below.
(c) The installer of a retrofit device installed pursuant to this subchapter shall assign a retrofit device family name to each retrofit device in the following format:

CA or US/MMM/YYYY/BART#/APP/XXXXX; where:

CA designates a retrofit device verified solely by CARB or by both CARB and the USEPA, and US designates a retrofit device verified solely by the USEPA;

MMM designates and is to be replaced by the manufacturer code. For a retrofit device verified by CARB, MMM will be replaced by the manufacturer code assigned by the CARB Executive Officer; for a retrofit device verified by the USEPA, the MMM will be replaced by three zeroes (000);

YYYY designates and is to be replaced by the year of verification;

BART# designates and is to be replaced by the BART level of the retrofit device by replacing the pound sign (#) with the number of the BART level;

APP designates and is to be replaced by the application for which the retrofit device has been verified by CARB or the USEPA. The verified application may include a combination of on-road (ON), off-road (OF) or stationary (ST); and

XXXXX designates and, for a retrofit device verified by CARB, is to be replaced by the five alphanumeric character code issued by the CARB Executive Officer; for a retrofit device verified by the USEPA, the XXXXX will be replaced by five zeroes (00000).

N.J. Admin. Code § 7:27-32.10