N.J. Admin. Code § 7:27-23.7

Current through Register Vol. 56, No. 24, December 18, 2024

Section 7:27-23.7 - Inspections

(a) The Department and its representatives shall have the right to enter and inspect any site, building or equipment, or any portion thereof, at any time, in order to ascertain compliance or non-compliance with the Air Pollution Control Act, N.J.S.A. 26:2C, this chapter, any permit, or any order or agreement issued or entered into pursuant thereto. Such right shall include, but not be limited to, the right to test or sample any materials at the facility, to sketch or photograph any portion of the site, building or equipment, to copy or photograph any document or records necessary to determine such compliance or non-compliance, and to interview any employees or representatives of the owner, operator or registrant. Such right shall be absolute and shall not be conditioned upon any action by the Department, except the presentation of appropriate credentials as requested and compliance with appropriate standard safety procedures.

(b) Owners or operators, and any employees or representatives thereof, of any manufacturing facility shall assist and shall not hinder or delay the Department and its representatives in the performance of all aspects of any inspection. Any facility manufacturing a coating will be considered a manufacturing facility for the purpose of this section, regardless of any other functions performed at the facility. Such assistance shall include making available sampling equipment necessary to conduct sampling at the facility and providing sampling facilities for the Department to determine the nature and quantity of architectural coating being provided, stored, transported, exchanged in trade, sold, or offered for sale at the manufacturing facility. During such testing by the Department, the equipment and all components connected, attached to, or serving the equipment shall be used and operated under normal routine operation conditions or under such other conditions as may be requested by the Department. The facilities may be either permanent or temporary, at the discretion of the person responsible for their provision, and shall conform to all applicable laws and regulations concerning safe construction and safe practice.

(c) Owners or operators, and any employees or representatives thereof, of any distribution facility, retail outlet or any person who applies coatings for compensation shall assist and shall not hinder or delay the Department and its representatives in the performance of all aspects of any inspection. Such assistance shall include providing any equipment necessary for access to all stock to allow the obtaining of samples by the Department to determine the nature and quantity of architectural coating being provided, stored, transported, exchanged in trade, sold, or offered for sale. In cases in which sampling equipment necessary to conduct sampling at the facility or sampling facilities to determine the nature and quantity of architectural coating at the facility are available on site, these equipment or facilities shall be made available for Department use.

N.J. Admin. Code § 7:27-23.7

Amended by R.1990 d.342, effective 7/16/1990.
See: 21 New Jersey Register 3360(a), 22 New Jersey Register 2145(b).
Requirements for manufacturing facilities separated from those for distributors and retailers.
Amended by R.2004 d.236, effective 6/21/2004 (effective 7/20/2004).
See: 35 New Jersey Register 2983(a), 35 New Jersey Register 4241(a), 36 New Jersey Register 3078(a).
In (c), substituted "any person who applies coatings for compensation" for "indirect consumer" in the first sentence, deleted "by the indirect consumer or at the retail or distribution outlet" at the end of the second sentence.