N.J. Admin. Code § 7:27-22.26

Current through Register Vol. 56, No. 19, October 7, 2024

Section 7:27-22.26 - MACT and GACT standards

(a) This section shall take effect upon EPA's interim approval of the Department's operating permit program except for (f)1, 2 and 3 below, which shall take effect upon EPA's interim approval of the Department's operating permit program or EPA promulgation of rules implementing 42 U.S.C. 7412(g), whichever is later.

(b) Except as provided at (c) and (d) below, an owner or operator of a facility subject to an EPA-promulgated MACT or GACT standard, or a case-by-case MACT standard, shall submit an application to the Department to have the MACT or GACT standard incorporated into the facility's operating permit pursuant to the relevant provisions of 7:27-22.5 for initial operating permits, 7:27-22.20 for administrative amendments, 7:27-22.23 for minor modifications, or 7:27-22.24 for significant modifications.

(c) An owner or operator of an area source subject to an EPA-promulgated MACT or GACT standard is not required to obtain an operating permit if the MACT or GACT standard as promulgated by EPA explicitly states that state agencies are given the option of excluding affected area sources from the requirement to obtain operating permits, provided that the only reason for needing an operating permit is the MACT or GACT standard.

(d) An owner or operator of an area source subject to an EPA-promulgated MACT or GACT standard may postpone applying for an operating permit for five years from the promulgation of the MACT or GACT standard, if the MACT or GACT standard as promulgated by EPA explicitly states that state agencies may defer the requirement to obtain operating permits for affected area sources, provided that the only reason for needing an operating permit is the MACT or GACT standard.

(e) A facility or source operation shall be subject to a MACT or GACT standard promulgated by EPA if:

1. The facility or source operation is in operation at the time the MACT or GACT standard is promulgated, and the facility or source operation meets the applicability criteria set forth in the MACT or GACT standard;

2. The facility or source operation is subsequently modified such that the facility or source operation would meet the applicability criteria set forth in the MACT or GACT standard; or

3. A new facility or source operation is constructed such that the new facility or source operation meets the applicability criteria set forth in the MACT or GACT standard.

(f) A case-by-case MACT standard shall be established for a facility or any source operation(s) which constitutes a major HAP facility if any of the following occur:

1. The construction of a major HAP facility, if EPA has not promulgated a specific MACT standard applicable to the new source operation(s);

2. The reconstruction of a major HAP facility, if EPA has not promulgated a specific MACT standard applicable to the reconstructed source operation(s);

3. The modification of a major HAP facility, if EPA has not promulgated a specific MACT standard applicable to the new or modified source operation(s), provided that:

i. Any physical change in, or change in the method of operation of, the major HAP facility increases the facility's actual emissions of any HAP by an amount that exceeds the de minimis emission rates set forth in the EPA document "Documentation of De minimis Rates for Proposed 40 CFR 63 Subpart B" (EPA 453/R-93-035); or

ii. Any physical change in, or change in the method of operation of, the major HAP facility results in the emission of any HAP not previously emitted in an amount that exceeds the de minimis emission rates set forth in the EPA document "Documentation of De minimis Rates for Proposed 40 CFR 63 Subpart B" (EPA 453/R-93-035); or

4. The failure of EPA to promulgate the specific MACT standard applicable to an existing major HAP facility by 18 months after the deadline set by EPA for such promulgation at 58 FR 63941.

(g) Case-by-case MACT standards established for major HAP facilities, or source operations which constitute a major HAP facility, shall be established in accordance with the provisions of 40 C.F.R. 63.

(h) The Department may allow a six year extension of time for complying with a MACT or GACT standard promulgated by EPA for one or more source operations at a facility, if the source operation achieves sufficient early reductions of HAP emissions as described in 7:27-22.34.

(i) A source operation for which construction or reconstruction is commenced after EPA proposes an applicable MACT or GACT standard, but before the MACT or GACT standard is promulgated, shall not be required to comply with the standard as promulgated until three years after the date construction or reconstruction is commenced, provided that the source operation, as authorized in the preconstruction permit, complies with the MACT or GACT standard as proposed. However, the source operation will still be subject to the operating permit application requirements described in (b) above.

(j) A facility which has installed BACT, pursuant to a permit required under 40 CFR 52.21, or LAER, pursuant to N.J.A.C. 7:27-18, prior to EPA's promulgation of a MACT or GACT standard applicable to that facility, shall not be required to comply with the MACT or GACT standard until five years after the date of that installation of BACT or LAER, if the BACT or LAER controls the same pollutant(s) as that identified in the MACT or GACT standard. However, the facility will still be subject to the operating permit application requirements described in (b) above.

N.J. Admin. Code § 7:27-22.26

New Rule, R.1995 d.493, effective 9/5/1995 (operative October 8, 1995).
See: 27 N.J.R. 1040(a), 27 N.J.R. 3421(a).
Public Notice.
See: 41 N.J.R. 3463(a).