N.J. Admin. Code § 7:26A-3.19

Current through Register Vol. 56, No. 21, November 4, 2024

Section 7:26A-3.19 - Additional application requirements for general approval to operate a recycling center for the receipt, storage, processing or transfer of Class D recyclable materials

(a) Prior to commencing receipt, storage, processing or transfer of used oil at a recycling center, the owner or operator of the recycling center shall submit to the Department, in addition to the information required pursuant to 7:26A-3.2, the following information:

1. The EPA ID number assigned to the facility;

2. A description of the preparedness and prevention procedures and equipment required by 7:26A-6.7(c)1;

3. A copy of the contingency plan as required by 7:26A-6.7(c) 2;

4. A description of the secondary containment system for containers or tanks to demonstrate compliance with 7:26A-6.7(e)4, 5 or 6, including at least the following:

i. Drawings and a description of the basic design parameters, dimensions and materials of construction of the containment system;

ii. The capacity of the containment system relative to the number and volume of containers or tanks within the system;

iii. A description of how the design promotes drainage or how the containers or tanks are protected from contact with standing liquids in the containment system;

iv. Provisions for preventing or managing accumulated precipitation or run-on; and

v. A description of how accumulated liquids will be analyzed and removed to prevent overflow;

5. A demonstration of compliance with labeling requirements of 7:26A-6.7(e)7;

6. A description of closure procedures and/or copy of the closure plan to demonstrate compliance with 7:26A-6.7(e)9;

7. A copy of an analysis plan as required by 7:26A-6.7(f);

8. A description of the method used to comply with the tracking requirements of 7:26A-6.7(g); and

9. A demonstration of compliance with the residue management requirements in accordance with 7:26A-6.7(j).

(b) Prior to commencing the receipt, storage, processing or transfer of any latex paints, antifreeze, lamps (light bulbs), oil-based paints, batteries, mercury-containing equipment and consumer electronics at a recycling center, the owner or operator of the recycling center shall submit to the Department, in addition to the information required pursuant to 7:26A-3.2, the following information:

1. The EPA ID number assigned to the facility;

2. A description of the preparedness and prevention procedures and equipment required by 7:26A-4.6(b);

3. A copy of the contingency plan as required by 7:26A-4.6(c);

4. A description of the secondary containment system for containers or tanks to demonstrate compliance with 7:26A-4.6(d)1 iii or (d)2ii, including at least the following:

i. Drawings and a description of the basic design parameters, dimensions and materials of construction of the containment system;

ii. The capacity of the containment system relative to the number and volume of containers or tanks within the system;

iii. A description of how the design promotes drainage or how the containers or tanks are protected from contact with standing liquids in the containment system;

iv. Provisions for preventing or managing accumulated precipitation or run-on; and

v. A description of how accumulated liquids will be analyzed and removed to prevent overflow;

5. A description of the design and operation of process buildings to demonstrate compliance with 7:26A-4.6(d)3, if applicable. The description shall include at least the following:

i. Drawings and a description of the basic design parameters, dimensions and materials of construction of the process building;

ii. The design capacity of the building relative to the volume of recyclable materials to be stored or processed within the building; and

iii. A description of the liquid collection and removal system required by 7:26A-4.6(d)3 iii (if applicable), including a discussion of how accumulated liquids will be characterized and removed;

6. A demonstration of compliance with labeling requirements of 7:26A-4.6(e); and

7. A description of closure procedures and/or copy of the closure plan to demonstrate compliance with 7:26A-4.6(g).

N.J. Admin. Code § 7:26A-3.19

New Rule, R.1996 d.577, effective 12/16/1996.
See: 28 N.J.R. 2240(a), 28 N.J.R. 5360(a).
Administrative change.
See: 30 N.J.R. 3948(a).
Amended by R.2002 d.182, effective 6/17/2002 (operative December 17, 2002).
See: 33 N.J.R. 4273(a), 34 N.J.R. 2088(a).
In (a), substituted "Prior to commencing receipt" for "Prior to the receipt" preceding "storage," and substituted "used oil" for "any Class D recyclable materials" following "or transfer of" in the introductory paragraph; added (b).
Amended by R.2009 d.52, effective 2/2/2009.
See: 40 N.J.R. 7(a), 41 N.J.R. 742(a).
In the introductory paragraph of (b), deleted "thermostats," preceding "lamps" and substituted "equipment" for "devices".