N.J. Admin. Code § 7:24A-3.2

Current through Register Vol. 56, No. 24, December 18, 2024

Section 7:24A-3.2 - Required submittals prior to execution of a loan award agreement

(a) An applicant who receives a notice of qualification shall submit the following materials prepared in accordance with accepted engineering practices, within the time period specified in N.J.A.C. 7:24A-3.1(a):

1. A complete engineer's report prepared, signed and sealed by a New Jersey-licensed professional engineer experienced in hydrologic, hydraulic, structural and geotechnical engineering. The report shall include, but is not limited to, the engineering assumptions, references, calculations and conclusions relative to the structural, hydrologic and hydraulic design of all elements within the project scope, as well as all information, narrative, data, and computations necessary to support and describe the design developed in such detail as to permit complete understanding of the project design;

2. Plans for the loan project prepared by a New Jersey-licensed professional engineer. Each drawing shall be signed and sealed and shall have a title block giving the name and location of the project, the scale or scales used, date, the name of the engineer and his or her license number. Plans shall show clearly the datum to which elevations shown are referred. The National Geodetic Vertical Datum of 1929 (U.S.G.S.) should be used wherever possible or an equation converting to that datum given. The plans shall clearly reflect and label all existing and proposed features;

3. Construction specifications, including, but not limited to:

i. General provisions, specifying the rights, duties, and responsibilities of the applicant, engineer and builder, and the prescribed order of work;

ii. Technical provisions, describing in detail the work methods, equipment, and materials to be used, the results to be obtained and the project and payment schedule; and

iii. All other provisions, submissions and certifications deemed necessary by the Department;

4. A detailed cost estimate of expenses for the project. The breakdown of the cost estimates shall be by unit price covering estimated labor, equipment, materials, supplies and contractor's overhead and profit. A summary form showing item number, description, estimated quantity, unit, unit price, and estimated amount is required; and

5. A description of the applicant's plan to repay the loan and pay any other expenses necessary to fully complete and implement the project and the steps the applicant has taken or will be taking to implement this plan.

(b) The Department reserves the right to waive any of the submission requirements of (a) above if it determines that the submission of such information is not required or necessary in order for the Department to enter into a loan award agreement with the applicant.

(c) An applicant who receives a notice of qualification shall obtain all necessary Federal, State and local permits and approvals within six months of the date of the notice of qualification. Failure to obtain the required permits within the required time period shall disqualify the project for a loan for that application period unless prior written approval for an extension has been granted by the Department.

1. The Department will extend the time for submission of the required materials and/or permits for up to three months if the applicant provides written justification of the need for such extension to the satisfaction of the Department. The applicant must submit such written justification to the Department no later than 30 days before the expiration of the specified six-month period.

2. The Department will grant an additional extension for the submission of the required permits and/or materials if the applicant demonstrates to the satisfaction of the Department that the permits are delayed through no fault of the applicant.

N.J. Admin. Code § 7:24A-3.2