Statutes, codes, and regulations
New Jersey Administrative Code
Title 7 - ENVIRONMENTAL PROTECTIONChapter 14C - SLUDGE QUALITY ASSURANCE
Subchapter 1 - SLUDGE MONITORING REQUIREMENTS
Section 7:14C-1.5 - Reporting categories

N.J. Admin. Code § 7:14C-1.5

Download
PDF
Current through Register Vol. 56, No. 24, December 18, 2024
Section 7:14C-1.5 - Reporting categories
(a) For the purposes of determining the frequency of sampling and analysis for submission of all required sludge reports and for determining proper sampling procedures, domestic treatment works shall be divided into categories on the basis of permitted flow as follows:
1. Category 1: Domestic treatment works with a permitted flow less than 0.1 MGD.
2. Category 2: Domestic treatment works with a permitted flow of 0.1 to 0.999 MGD.
3. Category 3: Domestic treatment works with a permitted flow from 1.0 to 4.999 MGD.
4. Category 4: Domestic treatment works with a permitted flow equal to or greater than 5.0 MGD.
5. If both an annual average flow and a monthly average flow are set in the NJPDES permit, the SQAR category under (a)1 through 4 above shall be determined by the annual average flow. If the permit sets staged flows, the SQAR category shall be determined according to each currently approved staged flow in the permit.
(b) For the purposes of determining the frequency of sampling and analysis for submission of all required sludge reports and for determining proper sampling procedures, industrial treatment works shall be divided into categories on the basis of annual sludge production, as follows:
1. Category 6: Any industrial wastewater treatment system with a sludge production greater than zero, but less than 290 dry metric tons per 365 day period.
2. Category 7: Any industrial wastewater treatment system with a sludge production equal to or greater than 290, but less than 1,500 dry metric tons per 365 day period.
3. Category 8: Any industrial wastewater treatment system with a sludge production equal to or greater than 1,500, but less than 15,000 dry metric tons per 365 day period.
4. Category 9: Any industrial wastewater treatment system with a sludge production equal to or greater than 15,000 dry metric tons per 365 day period.
5. Category 10: Any public water treatment system with a sludge production greater than zero, but less than 290 dry metric tons per 365 day period.
6. Category 11: Any public water treatment system with a sludge production equal to or greater than 290, but less than 1,500 dry metric tons per 365 day period.
7. Category 12: Any public water treatment system with a sludge production equal to or greater than 1,500, but less than 15,000 dry metric tons per 365 day period.
8. Category 13: Any public water treatment system with a sludge production equal to or greater than 15,000 dry metric tons per 365 day period.

N.J. Admin. Code § 7:14C-1.5

Repeal and New Rule, R.1989 d.282, effective 6/5/1989.
See: 21 N.J.R. 373(a), 21 N.J.R. 1530(a).
A rule concerning preparation and submission of sludge reports was formerly at this cite.
Recodified from N.J.A.C. 7:14-4.5 and amended by R.1999 d.164, effective 5/17/1999.
See: 31 N.J.R. 200(a), 31 N.J.R. 1320(a).
Deleted "daily" following "permitted" throughout; in (a)1, deleted "of 0.099 MGD or" following "flow" and inserted "than 0.1 MGD"; in (a)3, deleted the second sentence; rewrote (a)5; rewrote the introductory paragraph of (b); added (b)1 through (b)8; and deleted (c).