N.J. Admin. Code § 5:14A-13.3

Current through Register Vol. 56, No. 23, December 2, 2024

Section 5:14A-13.3 - Type certification

(a) Prior to selling the units to ride owners in the State, manufacturers shall obtain from the Department the applicable type certification for their inflatable rides.

(b) Registration of one inflatable ride design per application is required.

(c) Manufacturers shall submit the following documentation for each inflatable ride:

1. An illustration or picture of the ride;

2. A description of the ride (height, width, length, and, if applicable, slide length);

3. Calculations for tie-down requirements for both soft and hard surfaces with a list of the requirements;

4. Operation, maintenance, and set-up manuals as required by 5:14A-2.14 and 13.6;

5. Design calculations per inflatable ride, or class of ride if the wind load areas are comparable, indicating the number of anchorage points and anchor size based upon live and wind loads. The calculations shall be signed and sealed by a professional engineer licensed to practice in the State of New Jersey or, when the design is performed out-of-State, another qualified individual with substantially equivalent credentials; and

6. Flame resistant standards to which all materials used in the fabrication of the ride were tested and which those fabrics passed. Fabric manufacturer test certifications shall be available from the ride manufacturer for each inflatable unit.

N.J. Admin. Code § 5:14A-13.3

Amended by 50 N.J.R. 299(a), effective 1/16/2018