N.J. Admin. Code § 19:6-2.65

Current through Register Vol. 56, No. 24, December 18, 2024

Section 19:6-2.65 - National standards for foundations

(a) Replace SEC. MB-611.0 National Standard for Foundations in the Manual for the Standard Building Code of New Jersey with the following reference standards:

1. Accepted engineering practice:

i. Specifications and Dimensions for Wood Poles, 1963, USASI-05.1;

ii. Standard for the Preservative Treatment of all Timber Products by Pressure Processes, 1965, AWPA-C1;

iii. Standard for the Preservative Treatment of Piles by Pressure Processes, 1966, AWPA-C3;

iv. Standard for the Preservative Treatment of Poles by Pressure Processes, 1965, AWPA-C4;

v. Standard Instructions for the Inspection of Preservative Treatment of Wood, 1962, AWPA-M2;

vi. Standard for the Case of Pressure-Treated Wood Products, 1962, AWPA-M4;

vii. Standard Specification for Round Timber Piles, 1958; ASTM-D25;

viii. Specification for Welded and Seamless Steel Pipe Piles (Tentative), 1963, ASTM-A252;

ix. Test for Sieve or Screen Analysis of Fine and Coarse Aggregates, 1967, ASTM-C136;

x. Test for Materials Finer than No. 200 Sieve in Mineral Aggregates by Washing, 1966, ASTM-C117;

xi. Method of Test for the Moisture-Density Relation of Soils Using a 10 pound Rammer and an 18 in. Drop (Tentative), 1966, ASTM-D1557;

xii. Test for Sieve or Linear Analysis of Fine and Coarse Aggregates, 1967, ASTM-C136;

xiii. Test for Materials Finer than No. 200 Sieve in Mineral Aggregates by Washing, 1966, ASTM-C117;

xiv. Method of Test for the Moisture-Density Relation of Soils Using a 10 pound Rammer and an 18 inch Drop, 1966T, ASTM-D1557.

N.J. Admin. Code § 19:6-2.65