N.J. Admin. Code § 13:62-6.3

Current through Register Vol. 56, No. 21, November 4, 2024

Section 13:62-6.3 - Exceptions

(a) Hubrail posts constructed for use on motorcycle tracks shall be no higher than the hubrail planking.

(b) Hubrails constructed for use on motorcycle tracks shall consist of safety rails two feet high, constructed of two two-inch by 12-inch planks, on four-inch by four-inch stanchions spaced not more than six feet apart, and so embedded in the ground that they will not pull out if struck.

(c) As an alternative to the two-inch by 12-inch planks, two planks made of marine plywood, 3/4 inches thick and 12 inches wide may be used on motorcycle tracks. These rails shall be backed up either by a wire cable similar to the wire cable used on automobile hubrails, except that it need not exceed 1/2 inch in diameter, or in the alternative, a mound of packed earth shall be constructed in the back of the safety rail at least 18 inches high, and tapering to the ground level between the rail and the spectators.

N.J. Admin. Code § 13:62-6.3