N.J. Admin. Code § 13:62-11.20

Current through Register Vol. 56, No. 21, November 4, 2024

Section 13:62-11.20 - Seats

(a) A factory installed front seat may be utilized provided it is equipped with a headrest.

(b) Seats shall be attached to the main frame of the vehicle, the frame of the roll cage or to a substantial metal plate utilizing a minimum of six, three line, five-sixteenths inch bolts.

(c) The base of the seat shall be installed with four five-sixteenths inch bolts not more than three inches from the outside edge of the four most practical points.

(d) Two bolts shall be installed at the two most practical points at the top of the back of the seat and a metal strap of at least two inches in width and one-eighth inch in thickness shall connect every two bolts.

N.J. Admin. Code § 13:62-11.20