N.J. Admin. Code § 13:62-11.14

Current through Register Vol. 56, No. 21, November 4, 2024

Section 13:62-11.14 - Rollover cage

(a) Open cab vehicles shall be equipped with rollover cage surrounding the driver of a design, construction and quality affording the driver maximum protection against injury.

(b) Rollover bars installed in vehicles shall be a minimum of three inches above and six inches behind the driver's helmet.

(c) Rollover bars shall be a minimum of 1 3/4 inch outside diameter with a wall thickness of a minimum of.09 inch.

(d) Rollover bars welded, bolted or fastened to the flooring shall utilize a six inch by six inch by 1/4 inch base plate.

(e) Vehicles having uni-body construction may have a rollover bar welded to the frame of the vehicle utilizing six inch by six inch by 1/4 inch base plate affixed to the outer flooring.

(f) Rollover bars shall be plainly visible with the exception of built-in or integral rollover bars.

(g) Owners of vehicles with built-in or integral rollover bars shall maintain and provide upon request by the Superintendent or designee the manufacturer's detail drawing establishing the dimensions and material utilized.

N.J. Admin. Code § 13:62-11.14

Amended by R.2009 d.158, effective 5/4/2009.
See: 41 N.J.R. 381(a), 41 N.J.R. 2029(a).
In (b), substituted "vehicles" for "vehicle" and "helmet" for "head".