Current through Register Vol. 56, No. 21, November 4, 2024
Section 13:31-1.5 - Identification of licensees and permittees; vehicles; stationery; advertising(a) All commercial vehicles utilized in the practice of licensed electrical contracting shall be visibly marked on both sides with the following information: 1. The name of the licensed electrical contractor in lettering at least three inches in height; and2. The words "Electrical Contractor business permit number" or "Electrical Contractor Bus. Permit #" followed by the business permit number of the business permit holder in lettering at least three inches in height. i. Where available space for lettering is limited, either by design of the vehicle or by the presence of other legally specified identification markings, making strict compliance with (a)1 or 2 above impractical, the size of the lettering shall be as close to three inches high as possible within the limited space, provided the name is clearly visible and readily identifiable.(b) All business correspondence and stationery shall display the following information: 1. The name of the licensed electrical contractor;2. The words "Electrical Contractor business permit number" or "Electrical Contractor Bus. Permit #" followed by the business permit number of the business permit holder; and3. The business address, including the street name and number, of the qualifying licensee.(c) All advertising shall include the following information:1. The name of the licensed electrical contractor;2. The words "Electrical Contractor business permit number" or "Electrical Contractor Bus. Permit #" followed by the business permit number of the business permit holder; and3. The business address, including the street name and number, of the qualifying licensee.(d) Every licensed electrical contractor whose name, office address, place of practice, license number or business permit number appears or is mentioned in any advertisement of any kind or character shall be presumed to have caused, permitted or approved the advertising and shall be personally responsible for its content and character.(e) No licensee shall perform electrical contracting work without having in his or her possession a business permit identification as provided in 45:5A-9.N.J. Admin. Code § 13:31-1.5
Amended by 47 N.J.R. 651(b), effective 3/16/2015.