N.J. Admin. Code § 13:20-53A.6

Current through Register Vol. 56, No. 21, November 4, 2024

Section 13:20-53A.6 - Safety relief valves

(a) One or more spring-loaded internal safety relief valves shall be installed in each fuel supply container that is connected to vapor space.

(b) The fuel supply container shall be permanently marked to indicate the "set to discharge pressure" after the safety relief valves have been installed in the container.

(c) Safety relief valves for United States Department of Transportation fuel supply containers shall be approved by the Federal Bureau of Explosives and the valve setting shall be as required by that Bureau.

(d) The safety relief valve setting for ASME fuel supply containers shall be not less than 100 percent nor more than 110 percent of the maximum allowable service pressure of the container.

N.J. Admin. Code § 13:20-53A.6