N.J. Admin. Code § 13:20-53A.4

Current through Register Vol. 56, No. 21, November 4, 2024

Section 13:20-53A.4 - Fuel supply container markings

(a) Each LPG fuel supply container constructed in accordance with ASME specifications shall be permanently marked with the following information:

1. The official ASME Code U symbol;

2. The manufacturer's name, initials, or trademark;

3. The maximum allowable working pressure in pounds per square inch at degrees Fahrenheit;

4. The serial number; and

5. The year built.

(b) Each LPG fuel supply container constructed in accordance with United States Department of Transportation specifications shall be permanently marked with the following information:

1. The letters "USDOT" or "ICC" (referring to the former Interstate Commerce Commission) with the applicable specifications and service pressure;

2. The manufacturer's name, initials, or trademark, as registered with the United States Department of Transportation;

3. The serial number; and

4. The year tested.

(c) All fuel supply container inlets and outlets, except those for relief valves and gauging devices, shall be permanently marked to indicate whether they connect to vapor or liquid space.

N.J. Admin. Code § 13:20-53A.4