N.J. Admin. Code § 13:20-53A.15

Current through Register Vol. 56, No. 21, November 4, 2024

Section 13:20-53A.15 - LPG hose for high pressure liquid or vapor use

(a) All LPG hose and hose assemblies shall have a working pressure of not less than 350 pounds per square inch and a burst pressure of not less than 1,750 pounds per square inch.

(b) Each LPG hose shall be reinforced with corrosion-resistant wire braid and shall be of a type that has been tested and listed by the UL or by any other nationally recognized testing laboratory as meeting the UL requirements for LPG.

(c) Each LPG hose shall have the following permanent identification markings in letters and numerals at least 3/4 inch in height at intervals of 24 inches or less:

1. The manufacturer's name, initials, or trademark;

2. LPG or LP Gas; and

3. The working pressure.

N.J. Admin. Code § 13:20-53A.15