N.J. Admin. Code § 13:20-50B.31

Current through Register Vol. 56, No. 21, November 4, 2024

Section 13:20-50B.31 - Sanders and traction devices

(a) When used, a sander shall:

1. Be of a hopper cartridge valve-type;

2. Have a metal hopper with all interior surfaces treated to prevent condensation of moisture;

3. Be of at least 100 pound grit capacity;

4. Have a cover on the filler opening of the hopper that screws into place, sealing the unit airtight;

5. Have discharge tubes extending to the front of each rear wheel under the fender;

6. Have non-clogging discharge tubes with slushproof, nonfreezing rubber nozzles;

7. Be operated by an electric switch with a telltale pilot light mounted on the instrument panel;

8. Be exclusively driver-controlled; and

9. Have a gauge to indicate that the hopper(s) is down to one-quarter capacity.

(b) Automatic traction chains may be used.

N.J. Admin. Code § 13:20-50B.31