N.J. Admin. Code § 13:20-33.26

Current through Register Vol. 56, No. 21, November 4, 2024

Section 13:20-33.26 - Commercial vehicle inspection: wiring and switching

(a) Certification of a motor vehicle shall be refused for any of the following reasons:

1. The wiring is not in proper condition, is improperly installed, or is so located as to cause damage;

2. Any connection that is not secure or shows signs of corrosion;

3. The switches are not in proper condition or do not function properly;

4. Any light circuit that does not light the proper filament when the appropriate switch position is applied; or

5. Any defect in wiring and/or switching which adversely affects the lighting performance of any exterior light.

(b) Certification of a motor vehicle shall not be refused if replacement switches are present which perform the same function as the original switches, provided the safe operation of the motor vehicle is not adversely affected.

(c) Certification of a motor vehicle shall not be refused if replacement switches are present which perform the same function as the original switches but are not located in the original switch position(s), provided the safe operation of the motor vehicle is not adversely affected.

N.J. Admin. Code § 13:20-33.26

Amended by 48 N.J.R. 810(a), effective 5/16/2016