N.J. Admin. Code § 12:185-21.7

Current through Register Vol. 56, No. 23, December 2, 2024

Section 12:185-21.7 - Miscellaneous equipment and machinery

(a) Clutches or clutch pulleys having projecting moving parts located seven feet or less above the floor or working platform shall be enclosed by an approved stationary guard.

(b) Clutch handles shall be removed and located as far as possible from any danger of accidental contact, but still within reach of the operator.

(c) All exposed gears within seven feet of the floor level must be entirely enclosed.

(d) All machinery not included in the foregoing sections shall have all moving parts within seven feet of the floor level guarded against accidental contact.

(e) All repairs or service pits when not in actual use, shall be either covered or protected by movable post or stanchions and chain rails or other railing guards which will afford at least equivalent protection.

N.J. Admin. Code § 12:185-21.7

Amended by R.2006 d.428, effective 12/4/2006.
See: 38 N.J.R. 3130(a), 38 N.J.R. 5165(b).
Recodified 21.7.1 through 21.7.5 as (a) through (e).