Section Saf-C 2008.06 - Supplemental Utility Dealer Plate(a) In order for a utility dealer to obtain a supplemental utility dealer plate, the utility dealer shall: (1) Meet the requirements of Saf-C 2008.03;(2) Have an established place of business, that is a permanent, enclosed commercial building located within this state, easily accessible and open to the public at all reasonable times, and at which the business of a dealer may be lawfully carried on in accordance with the terms of all applicable building codes, zoning, and other land-use regulatory ordinances, and that shall also: a. Be a business location where the retail vehicle dealer conducts sales during normal business hours;b. Be a business location with a permanent physical structure that has at least 750 square feet or is primarily dedicated to the business of selling vehicles; andc. Be a business location that clearly and conspicuously displays the business name of the dealer in letters no less than 10 inches in height, unless prohibited by local zoning;d. Be a business location whose signage described in c., above, shall be clearly visible from a traveling vehicle on the adjacent public way, unless an obstruction exists which cannot be remedied; and(3) Obtain a bond, pursuant to RSA 261:98; and(4) Attend the dealer overview session in accordance with the requirements of Saf-C 2003.07.(b) A utility dealer shall be issued only one supplemental utility dealer plate.(c) The supplemental utility dealer plate shall be used for the sole purpose of allowing a customer to test drive a motor vehicle taken in trade, pursuant to RSA 261:121, II.N.H. Admin. Code § Saf-C 2008.06
Amended by Volume XXXVI Number 06, Filed February 11, 2016, Proposed by #11028, Effective 1/29/2016, Expires 1/29/2026.