N.H. Admin. Code § Plc 313.18

Current through Register No. 50, December 12, 2024
Section Plc 313.18 - Substantially Similar Requirements for the Professions Regulated by the Board of Barbering, Cosmetology, and Esthetics

For purposes of obtaining a license by endorsement in a profession regulated by the board of barbering, cosmetology, and esthetics, the current requirements of the licensing jurisdiction shall be follows:

(a) For a barber license, the following:
(1) Graduate from a state-approved education or training program for barbers; and
(2) Pass a state-approved competency examination for barbers;
(b) For a cosmetologist license, the following:
(1) Graduate from a state-approved education or training program for cosmetologists; and
(2) Pass a state-approved competency examination for cosmetologists;
(c) For an esthetician license, the following:
(1) Graduate from a state-approved education or training program for estheticians; and
(2) Pass a state-approved competency examination for estheticians;
(d) For a manicurist license, the following:
(1) Graduate from a state-approved education or training program for manicurists or nail technicians; and
(2) Pass a state-approved competency examination for manicurists or nail technicians;
(e) For a master barber license, the following:
(1) Graduate from a state-approved education or training program for master barbers; and
(2) Pass a state-approved competency examination for master barbers; and
(f) For a school instructor:
(1) Hold a personal license, or be eligible for a personal license, in the profession to be taught;
(2) Complete the state-approved training program, experience, or education requirements for instructors; and
(3) Pass a state-approved competency examination for instructors.

N.H. Admin. Code § Plc 313.18

Derived from Number 45, Filed November 9, 2023, Proposed by #13763, Effective 10/15/2023, Expires 4/12/2024.
Amended by Number 24, Filed June 13, 2024, Proposed by #13954, Effective 5/3/2024, Expires 5/3/2034 (formerly Plc 313.17) (see Revision Note #1 at part heading for Plc 313).