Section Plc 1205.01 - Licensed Court Reporter Seal Required(a) As required by RSA 310-A:172, upon receiving a license as a court reporter, the licensee shall acquire an impression type seal or rubber stamp of the design specified in (b), below.(b) The seal shall consist of 2 concentric circles, with the outer circle having a diameter of 1-9/16 inches and the inner circle having a diameter of 15/16 inches. In the space between the circles, the top shall be the words "Licensed Court Reporter" and at the bottom "State of New Hampshire". In the space inside the inner circle shall be the full name of the licensee and the license number written horizontally, and the reporting method as shown on the license.(c) As required by RSA 310-A:172, the licensee shall affix the seal to all transcripts prepared by the licensee or prepared under this licensee's direct supervision for use in New Hampshire.(d) As prohibited by RSA 310-A:172, no licensee shall: (1) Stamp or seal any document with the licensee's seal or do any other act as a licensed court reporter after the license has expired or has been suspended, revoked, or surrendered voluntarily; or(2) Stamp or seal any document that was not prepared by the licensee personally or under the licensee's direct supervision.(e) As required by RSA 310-A:179, each licensed court reporter shall display the license number on any transcripts produced by the licensee and on all business cards and other information made available to the public by the licensee.(f) Each licensed court reporter also shall display the license number on any transcripts produced by the licensee and on all business cards and other information made available to the public by the licensee in electronic format.(g) Each licensed court reporter shall ensure that the license number is displayed on any of the items listed in (e), above, that are prepared or made available to the public on behalf of the licensee, whether in material form or electronically.N.H. Admin. Code § Plc 1205.01
Derived from Number 6, Filed February 9, 2023, Proposed by #13547, Effective 2/1/2023, Expires 7/31/2023.Derived from Number 32, Filed August 10, 2023, Proposed by #13704, Effective 8/1/2023, Expires 8/1/2033 (See Revision Note at chapter heading for Plc 1200).