Section Lab 1403.38 - Mechanical Power PressesThe employer shall ensure compliance with the following requirements:
(a) The employer shall provide and ensure the usage of point-of-operation guards or properly applied and adjusted point-of-operation devices, per the manufacturer's recommendation, to prevent entry of hands or fingers into the point-of-operation by reaching through, over, under, and around the guard on every operation performed on a mechanical power press. This requirement shall not apply when the point-of-operation opening is 1/4 inch or less;(b) A guard shall be placed over the treadle of foot-operated presses;(c) Pedal counterweights, if provided on foot-operated presses, shall have the path of travel of the weight enclosed; and(d) Machines using full revolution clutches shall incorporate a single stroke mechanism except where automatically fed in continuous operation and where the points of operation are safeguarded by a fixed barrier guard.N.H. Admin. Code § Lab 1403.38
#4118 eff 8-22-86, EXPIRED: 8-22-92
New. #6684, eff 2-4-98, EXPIRED: 2-4-06
New. #8606, INTERIM, eff 4-12-06, EXPIRED: 10-09-06 (formerly Lab 1403.51 )
New. #8796, eff 1-11-07
Amended and Renumbered from Lab 1403.35 by Volume XXXV Number 18, Filed May 7, 2015 , Proposed by #10809, Effective 4/9/2015, Expires4/9/2015.