Section Fors 305.03 - Licensed Forester Seal/Stamp(a) Upon issuance of a license, the licensee shall acquire a digital seal, an impression type seal, or rubber stamp of the design in compliance with these rules. The seal shall bear the licensee's name and number as shown on the license. This seal and original signature shall be affixed on all plans, maps, contracts, and reports prepared by the licensee unless the licensee is exempt under provisions of RSA 310-A:98.(b) The seal shall consist of 2 concentric circles, the outer circle having a diameter of 1-9/16 inches and an inner circle having a diameter of 15/16 of an inch. In the space between the circles there shall be the words "State of New Hampshire" at the top of the circle and the words "Professional Forester" at the bottom of the circle. In the space inside the inner circle shall be the full name of the licensee and the license number written horizontally. Below the licensee's name and number and inside the curve of the inner circle shall be the word, "Licensed."(c) The stamping or sealing of any documents by the licensee with the licensee's seal after the license has expired, has been suspended, revoked, or surrendered voluntarily shall be a violation of these rules and RSA 310-A:114. The stamping or sealing of any documents by the licensee not prepared by the licensee personally or under the licensee's direct supervision shall be a violation of these rules and RSA 310-A:114.N.H. Admin. Code § Fors 305.03
#5222, eff 9-11-91; EXPIRED 9-11-97
New. #6597, INTERIM, eff 10-8-97, EXPIRED: 2-5-98
New. #6876, eff 10-28-98; ss by #8710, eff 8-25-06; ss by #10544, eff 3-13-14
Amended by Number 6, Filed February 8, 2024, Proposed by #13855, Effective 3/17/2024, Expires 3/17/2034.