Section Env-Wq 304.15 - Meeting with Certification Committee Required(a) Subject to (b), below, each applicant who meets all requirements for a grade II or II-OIT or higher certification, whether by examination or reciprocity, shall meet with the certification committee prior to receiving certification.(b) An operator previously certified in New Hampshire who has met with the committee shall not be required to meet with the committee again when certified at a higher grade.(c) An applicant who meets all requirements for a grade I certification who knows at the time of certification that he or she will be the operator in responsible charge at a plant in New Hampshire shall meet with the certification committee prior to receiving certification.(d) An operator holding a grade I certification who is designated as the operator in responsible charge pursuant to Env-Wq 304.29(b)(1) shall contact the certification committee within 10 working days of being so designated to schedule a meeting with certification committee, if the operator has not already met with the committee pursuant to (c), above.(e) An operator holding a grade I certification who is designated as a back-up certified operator pursuant to Env-Wq 304.29(b)(2) shall include a request to meet with the certification committee in the notice provided pursuant to Env-Wq 304.26(c).N.H. Admin. Code § Env-Wq 304.15
(See Revision Note at part heading for Env-Wq 304) #10392, eff 8-1-13