Section Env-Wq 1606.08 - Transfer/Storage Tank Permit Requirements and Limitations(a) To apply for a transfer/storage tank permit, the person seeking the permit shall submit: (1) The information specified in Env-Wq 1606.09;(2) The fee specified in Env-Wq 1606.10; and(3) The certifications specified in (c), below.(b) A transfer/storage tank permit shall be issued, pursuant to Env-Wq 1606.11, to an applicant for an individual operating site only, provided that the following requirements are met: (1) A spill response plan, describing spill response equipment and disinfection and containment capability at the septage storage tank location(s), shall be submitted to, and approved by the department pursuant to Env-Wq 1606.16(f);(2) All septage transfer between hauler vehicles and storage tanks shall be by a watertight hose and connection;(3) Odor controls shall be provided to minimize odor potential during transfer; and(4) The property is owned by the applicant or the owner has granted permission to so use the property.(c) The applicant shall submit certification, signed by the applicant attesting to the following: (1) That the applicant has read and understands, and shall comply with all applicable requirements for the siting, design, construction, and operation of the septage storage tank(s) as identified in Env-Wq 1606.15 and Env-Wq 1606.16; and(2) That the applicant meets all the requirements under Env-Wq 1605 if the applicant is a permitted hauler.(d) If the applicant is not the property owner, the application submitted pursuant to (a), above, shall be accompanied by a written statement, signed by the property owner, that the property owner is aware that the information is being filed and has given permission to the applicant to operate the storage tank(s) and to enter upon the property for purposes of site investigation and placement and operation of the septage storage tank(s).N.H. Admin. Code § Env-Wq 1606.08
#8458, eff 10-27-05 (see Revision Note at chapter heading); ss by #10466, eff 11-26-13