Section Env-Sw 902.02 - Collection, Storage and Transfer Requirements(a) Collection, storage and transfer of ash shall comply with Env-Sw 400 and this section.(b) Ash shall be collected and stored in containers in a manner which: (1) Avoids the dispersion of ash residue, including particulates;(3) Prevents rain water infiltration; and(4) Collects and controls the free liquid that drains from the ash, if the ash is quenched or treated with applied liquids.(c) Prior to transfer, ash generators shall comply with the hazardous waste determination requirements in Env-Hw 502 and thereby assure proper management of the ash as follows: (1) If the ash is determined to be a hazardous waste, it shall be managed as a hazardous waste in accordance with all applicable state rules and federal hazardous waste regulations; and(2) If the ash is determined to be non-hazardous, it shall be managed as a solid waste in accordance with this part.(d) Ash shall not be transferred from the generator's collection area until cooled sufficiently as to eliminate the potential to cause fire and burn injury.(e) The transfer of ash from one location to another shall comply with Env-Sw 902.06.(f) Prior to unloading, ash shipments received by a collection, storage and transfer facility shall be inspected by the receiving facility to determine whether the load is hot.(g) Hot ash shall not be deposited at a receiving facility where it might start a fire or cause burn injury.(h) Hot ash shall be segregated from combustible materials, contained and extinguished.N.H. Admin. Code § Env-Sw 902.02
#5172, eff 7-1-91; ss by #6535, INTERIM, eff 7-1-97, EXPIRES: 10-29-97; ss by #6619-B, eff 10-29-97; (See Revision Note at chapter heading for Env-Sw 900) ss by #8459, eff 10-28-05 (formerly Env-Wm 2602.02 )
Amended byVolume XXXIV Number 24, Filed June 12, 2014, Proposed by #10598, Effective 7/1/2014, Expires7/1/2024.