Section Env-Or 703.05 - Required Facility Plan The facility plan required by Env-Or 703.02(a)(2) shall be prepared in accordance with the following:
(a) The plan shall include a title, a legend, and a true north arrow;(b) The plan shall be drawn to scale and the scale shall be noted on the plan and include a graphic scale bar;(c) The base plan sources from which the facility plan was derived shall be noted on the plan;(d) The location, elevation, and datum of a bench mark shall be included, provided that if a bench mark referenced to NGVD is within 1,000 feet of the facility, the elevation shall be recorded using NGVD and the source of the NGVD bench mark information shall be noted on the plan;(e) Ground surface spot elevations and contours shall be marked to show topography; and(f) The facility plan shall identify and locate, to the extent ascertainable, the following: (1) Physical structures, storage areas, and buildings associated with the facility;(2) Existing and proposed groundwater monitoring wells that will be monitored;(3) Surface water sampling points;(4) Groundwater contours that accurately show current groundwater flow direction within 100 feet of the facility, with a table of water level measurements and elevations found in piezometers and monitoring wells used to develop the groundwater contours;(5) Surface waters within 100 feet of the facility;(6) Land surface contours within 100 feet of the facility;(7) Piezometers used to develop groundwater contours;(8) Soil borings and test pits within 100 feet of the facility;(9) Above and underground storage tanks associated with the facility;(10) Underground utilities at the facility; and(11) Subsurface drains at the facility.N.H. Admin. Code § Env-Or 703.05
(See Revision Note at chapter heading for Env-Or 700) #8812, eff 2-1-07
Amended by Volume XXXV Number 23, Filed June 11, 2015 , Proposed by #10832, Effective 6/1/2015, Expires6/1/2025.