Section Env-Or 406.20 - Leak Monitoring Equipment Testing(a) The owner of a UST system shall test all leak monitoring equipment annually for proper operation.(b) The owner shall submit the information required by (c), below, on a form obtained from the department or another representative form no later than 30 days after the date of the test.(c) The results of the leak monitor test shall include the following: (1) The information required by Env-Or 406.13(c)(1)-(6);(2) Leak monitor model number and manufacturer's name;(3) Verification that the leak monitor console assignments are correctly programmed and labeled for all sensors;(4) Verification that the tank and piping sensors for the secondary containment is positioned in accordance with the manufacturer's requirements;(5) Verification that the brine level of the tank interstitial space is within the manufacturer's operating range;(6) Verification that the secondary containment is free of debris, water, and regulated substance;(7) Verification that all sensors were visually inspected and confirmed operational by manually simulating an alarm condition;(8) Verification that all leak monitor console audible alarms are operational;(9) Verification that all leak monitor console visual alarms are operational;(10) Verification that the communication system, such as a modem, is operational for leak monitoring systems and will relay alarms to a remote station; and(11) Verification that all secondary containment is continuously monitored.(d) The testing technician who conducts the test shall sign the test report in accordance with Env-Or 406.13(e).(e) The testing technician shall attach to the form the information necessary to verify that this information is correct.N.H. Admin. Code § Env-Or 406.20
(See Revision Note at chapter heading for Env-Or 400) #10393, eff 9-1-13
The amended version of this section by New Hampshire Register Volume 38, Number 45, eff. 10/10/2018 is not yet available.