Section Env-Or 406.07 - Requirements for Test Reports(a) When a tightness test is performed, the owner shall submit a report of the tightness test that meets the requirements of (c) through (e), below. The report may be generated by the owner or may be submitted on a form available from the department or on any other document containing the required information.(b) The owner shall submit the tightness test report to the department no later than 30 days after the date of the test.(c) The test report submitted pursuant to (a), above, shall include: (1) The UST facility registration number;(2) The UST facility location, by street address and municipality;(3) The name, address, and daytime telephone number including area code of the UST system owner;(4) The date of the test;(5) The tester's name, company address, and daytime telephone number including area code;(6) The number and expiration date, if any, of the tester's certification, if a certified tester is required for the test being performed; and(7) The information required by (d), below.(d) The test report submitted pursuant to (a), above, shall include the following information for each UST system or component tested: (1) The capacity of the UST system;(2) The age of the UST system;(3) The regulated substance stored in the UST system;(4) The location of the UST system on the UST facility's property;(5) Any other information necessary to accurately identify the UST system;(6) A copy of the field technician's testing records;(7) A list of each system component tested;(8) A description of any piping, fittings, or connections that were tightened or repaired;(9) The length of any waiting periods after regulated substance delivery, topping, or vapor space disturbances;(10) A description of the temperature measurement equipment and method used for the tightness test;(11) A description of the re-leveling procedure used;(12) The type of testing equipment used for the test, by manufacturer name and model number, together with the date of last calibration and maintenance of the testing equipment;(13) Test duration time; and(14) A description of the vapor pocket measurement and elimination procedure used.(e) The technician who performed the test shall sign the test report to certify: (1) The validity, method, and accuracy of the test;(2) That the test complies with requirements of this chapter; and(3) That he or she is qualified to perform the test.(f) The owner shall keep the test report and any other documents describing the type of test, contractor, date, materials, all technician testing data, and any other information pertinent to the tightness testing performed for the life of the system.(g) If information submitted to the department causes the department to question the accuracy of the test or test report, the person who conducted the tank tightness tests shall provide the department with information on all testing equipment and protocols that have the potential to affect the accuracy of the test within 10 days of the department requesting the information.N.H. Admin. Code § Env-Or 406.07
(See Revision Note at chapter heading for Env-Or 400) #10393, eff 9-1-13
Amended by Volume XXXVIII Number 45, Filed November 8, 2018, Proposed by #12643, Effective 10/10/2018, Expires 10/10/2028.