Section Env-Or 306.06 - Inspection Reports: Contents and Signatures(a) Each inspection report required by Env-Or 306.07 through Env-Or 306.09 shall contain the following information: (1) The date of the inspection;(2) The name and position of the individual conducting the inspection;(3) The tank registration number of the specific AST system, AST, or piping being inspected, as applicable;(4) Whether any of the conditions for which the inspection is being conducted, as identified in the applicable section, were observed and, if so, where and on which equipment or structure the conditions existed; and(5) For each condition noted pursuant to (4), above: a. A description of the condition in sufficient detail that it can serve as a point of reference for future inspections; andb. A recommendation either that the condition be monitored or that the component be repaired, replaced, or taken out of service.(b) Each inspection report required by Env-Or 306.07 through Env-Or 306.09 shall be signed by the individual who conducted the inspection. Such signature shall constitute certification that the information provided is true, complete, and not misleading to the knowledge and belief of the signer.(c) The signature on an inspection report prepared by a certified AST inspector required by Env-Or 306.08 and Env-Or 306.09 shall include the inspector's API or STI certification number or professional engineer stamp, as applicable.N.H. Admin. Code § Env-Or 306.06
(See Revision Note at chapter heading for Env-Or 300) #10487, eff 2-7-14