Section Env-A 808.02 - Applicability(a) The owner or operator of a stationary source shall install, operate, maintain, and perform quality assurance testing of a gaseous or opacity CEM system meeting all of the requirements specified in this part for a stationary source if any of the following conditions exists: (1) A source is subject to the New Source Performance Standards, 40 CFR 60, National Emission Standards for Hazardous Air Pollutants, 40 CFR 61 or 40 CFR 63, or Continuous Emission Monitoring, 40 CFR 75, or other applicable federal standard which requires the source to comply with a specified opacity or emission limit and to install a specified CEM system;(2) The owner or operator of a source chooses to limit its potential to emit by accepting federally enforceable permit conditions that restrict its hours of operation, the type or amount of material combusted, stored, or processed, or its level of production, and continuous emission monitoring is determined by the department to be necessary to ensure that these permit conditions are not violated;(3) A source uses air pollution control equipment in order to maintain compliance with an opacity or emission limit, and continuous emission monitoring is determined by the department to be necessary in order to ensure that this limit is not exceeded and that the control equipment is performing correctly;(4) Documented and repeated violation of any of the applicable opacity or emission limits specified in other provisions of Env-A 300 et seq., has occurred and the installation of a CEM system is feasible;(5) Documented and repeated violation of any of the National Ambient Air Quality Standards (NAAQS) specified in Env-A 300 has occurred, the source is determined by the department to be a major contributor to the violation, and the installation of a CEM system is feasible; or(6) By following the procedures specified in 40 CFR 51, Appendix W, the department determines that a source's emissions have a significant impact on air quality and continuous monitoring of emissions with a CEM system is necessary to ensure that the ambient air quality standards are achieved and maintained.(b) A stationary source subject to the continuous emission monitoring requirements specified in 40 CFR 51, Appendix P shall install, calibrate, operate, and maintain a CEM system in accordance with all requirements set forth and referenced therein.(c) A facility subject to both this part and the emission monitoring requirements of Env-A 3200 shall comply with: (1) The NOx monitoring requirements as described in Env-A 3200;(2) The minimum percentage data availability requirements as described in Env-A 808.12; and(3) The data reporting requirements as described in Env-A 808.14, as applicable.N.H. Admin. Code § Env-A 808.02
#7788, eff 10-31-02; ss by #9802, eff 10-31-10
Amended by Volume XXXIX Number 19, Filed May 9, 2019, Proposed by #12762, Effective 5/1/2019, Expires 5/1/2029.