Section Env-A 1810.18 - Asbestos Project Designer Requirements(a) No individual shall function as an asbestos project designer for schools in New Hampshire without first being certified as an asbestos project designer under the provisions of this chapter.(b) The applicant shall provide, on the "Application for Certification as an Asbestos Inspector, Management Planner and/or Project Designer" form, the information required by Env-A 1810.03(b)(1) including documentation that the applicant has: (1) Attended and completed an approved asbestos abatement project designer course as outlined in Env-A 1809.03(g) and (i), with a score of 70 percent or greater on the required written examination; and(2) One of the following combinations of education, training, and professional registration: a.At least 12 months experience in asbestos abatement and a bachelor's degree in industrial hygiene, occupational health, environmental science, biological science, physical science, or a closely related field;b.At least 12 months experience in asbestos abatement and registration as a registered architect or registered engineer; orc.At least 2 years' experience in asbestos abatement including experience in asbestos abatement design. (c) The department shall renew an asbestos abatement project designer certification annually provided the certificate holder:(1) Meets the requirements for certification renewal specified in Env-A 1810.08; and(2) Provides on the "Application for Certification as an Asbestos Inspector, Management Planner and/or Project Designer" form, documentation that the applicant has attended and completed an approved asbestos abatement project designer annual review training course as outlined in Env-A 1809.03(j), with a score of 70 percent or greater on the written examination.N.H. Admin. Code § Env-A 1810.18
(See Revision Note at chapter heading for Env-A 1800) #9298, eff 10-21-08
Amended by Volume XXXVII Number 19, Filed May 11, 2017, Proposed by #12172, Effective 5/5/2017, Expires 5/5/2027.