The owner or operator of a pleasure craft surface coating operation subject to this part shall control VOC emissions by using one of the following control options, provided that if a specific coating is subject to more than one emission limit, the least stringent emission limit shall apply:
Table 1212-7 VOC Content Limits Based on Low-VOC Coatings
Coating Category | kg VOC/l coating | lb VOC/gal coating |
Extreme High-Gloss Topcoat | 0.60 | 5.1 |
High-Gloss Topcoat | 0.42 | 3.5 |
Pretreatment Wash Primer | 0.78 | 6.5 |
Finish Primer/Surfacer | 0.42 | 3.5 |
High Build Primer Surfacer | 0.34 | 2.8 |
Aluminum Substrate Antifoulant Coating | 0.56 | 4.7 |
Antifouling Sealer/Tie Coating | 0.42 | 3.5 |
Other Substrate Antifoulant Coating | 0.40 | 3.3 |
All Other Pleasure Craft Surface Coatings for Metal or Plastic | 0.42 | 3.5 |
Table 1212-8 VOC Content Limits Per Volume Solids
Coating Category | kg VOC/l solids | lb VOC/gal solids |
Extreme High-Gloss Topcoat | 1.10 | 9.2 |
High-Gloss Topcoat | 0.80 | 6.7 |
Pretreatment Wash Primers | 6.67 | 55.6 |
Finish Primer/Surfacer | 0.80 | 6.7 |
High Build Primer Surface | 0.55 | 4.6 |
Aluminum Substrate Antifoulant Coating | 1.53 | 12.8 |
Other Substrate Antifoulant Coating | 0.53 | 4.4 |
All other pleasure craft surface coatings for metal or plastic | 0.80 | 6.7 |
N.H. Admin. Code § Env-A 1212.08
(See Revision Note at chapter heading for Env-A 1200) #9933, eff 6-1-11