N.H. Admin. Code § Agr 1405.36

Current through Register No. 50, December 12, 2024

Section Agr 1405.36 - Placed in Service/Inspection Report for Vehicle Scales

(a) In addition to other requirements set by rule, statute, or other law, each registered service technician shall complete and submit form "Placed in Service/Inspection Report Form Vehicle Sales SCLGCAP REV. 8/10" to the department.

(b) A registered service technician shall furnish the following on form "Placed in Service/Inspection Report Form Vehicle Sales SCLGCAP REV. 01/07":

(1) Name of business;

(2) Full address, including city, state, and zip code;

(3) The following information about each vehicle tank meter at the business:

a. Whether installed;

b. Whether certified and stamp number;

c. Whether repaired;

d. Whether tested and calibrated;

e. Whether rejected;

f. Make of scale;

g. Scale capacity;

h. Serial number of scale;

i. Make of beam or dial;

j. Minimum grad;

k. Make of indicator;

l. Platform size;

m. Type of levers; and

n. Balance condition on arrival;

(4) Section test as found;

(5) Section test as sealed;

(6) The following information about the load test results:

a. Sensitivity requirement ("SR") at zero;

b. SR at maximum test load; and

c. Scale indication;

(7) The following information about each performance data as found and as sealed:

a. Test load;

b. Scale indication; and

c. Error; and

(8) The following information about the strain-load test from left to right and right to left:

a. Indicate weight of empty truck;

b. Amount of test weights added;

c. Scale indication; and

d. Error on test weighs only.

N.H. Admin. Code § Agr 1405.36

#10168, eff 8-3-12

Amended by Volume XXXVII Number 50, Filed December 14, 2017, Proposed by #12424, Effective 12/1/2017, Expires 12/1/2027.